The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B Assembly Procedures
Plug Assembly Sequence
Insulator/contact assembly
Push/pull locking collar
Spring
Seal bushing
Strain relief
Back shell
1
A
B
A
Cable
B
2 - -0.5 mm
Solder type : 3 and 6 pos.
Solder type : 12 pos.
Crimp type : 10 and 12 pos.
2 mm
2 mm
0
5.5 mm max.
10 mm max.
15 to 20 mm
Thread the back shell, strain relief, seal bushing, spring and push/pull locking collar over the cable as shown above.
Block end face
Insulator/contact assembly
Solder termination fixture
2
Solder type
1. Pre-solder the exposed cable conductors (dia. A). The diameter of the pre-soldered conductors should not exceed 0.7
mm for 6 contact plug and 1.0 mm for 3 contact plug.
2. Insert the insulator body over the applicable solder termination fixture.
3. Insert the pre-soldered conductors in the contact soldering pot and solder them in place.
Soldering iron temperature should be 280 ±10? applied for 3-4 second.
Crimp type
1. Crimp the applicable contact to the stripped conductor. Use correct crimp tools. Verify the dimensions and crimp
configuration.
2. Insert the contact into the appropriate opening in the insulator body.
3. Verify fully seated position by applying a slight pull force on the conductor. The contact should remain in place.
Re-insert if not seated.
10
相关PDF资料
P51-750-S-M-P-5V-000-000 SENSOR 750PSIS M10 5V
7Q-16.3676MBG-T OSC TCXO 16.3676 MHZ 3.3V SMD
P51-500-S-M-P-5V-000-000 SENSOR 500PSIS M10 5V
ASHEK-32.768KHZ-LT OSCILLATOR 32.768KHZ 3.3V SMT
7Q-16.367667MBG-T OSC TCXO 16.367667 MHZ 3.3V SMD
P51-300-S-M-P-5V-000-000 SENSOR 300PSIS M10 5V
P51-200-S-M-P-5V-000-000 SENSOR 200PSIS M10 5V
1.90100.0220000 PB FILAMENT LAMP T 4.5 BASE 12V
相关代理商/技术参数
HR30-6PA-10P 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors
HR30-6PA-10PC 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors
HR30-6PA-10PD 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors
HR30-6PA-10S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors
HR30-6PA-10SC 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors
HR30-6PA-10SD 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors
HR30-6PA-12P 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors
HR30-6PA-12PC 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors